Epoxy Floor Paint Anti Slip 2.5L packshot
Painting Tile Red Epoxy Floor Paint Anti Slip onto a floor with a roller
Epoxy Floor Paint Tile Red Anti Slip drying
Epoxy Floor Paint Anti Slip 2.5L packshot
Painting Tile Red Epoxy Floor Paint Anti Slip onto a floor with a roller
Epoxy Floor Paint Tile Red Anti Slip drying

Epoxy Floor Paint Anti Slip - 2.5L

SKU: FS-00020

Epoxy Floor Paint Anti Slip 2.5L packshot
Painting Tile Red Epoxy Floor Paint Anti Slip onto a floor with a roller
Epoxy Floor Paint Tile Red Anti Slip drying
Epoxy Floor Paint Anti Slip 2.5L packshot
Painting Tile Red Epoxy Floor Paint Anti Slip onto a floor with a roller
Epoxy Floor Paint Tile Red Anti Slip drying
£48.95 INC VAT
£40.79 EXC VAT
£48.95 INC VAT
£40.79 EXC VAT

In stock

An industrial grade, slip resistant heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean - with the lowest price guaranteed.

Product Features:

  • The lowest price - guaranteed!
  • Use in warehouses, workshops, showrooms and factories with heavy wear and tear
  • Top choice for garage floors as it won't mark from hot tyres
  • Use on bare concrete or existing well bonded paint
  • Water based formulation, virtually solvent free and easy to clean
Select Colour
How much do I need? How much do I need?
Epoxy Floor Paint - 5L Epoxy Floor Paint - 2.5L Epoxy Floor Paint Anti Slip - 5L

4L Coloured Curing Agent in a 5L tin
1L Clear Resin
x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
(These are mixed together to make 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 5L is equivalent to 6.6kg

You might also like:

18783453806661

18783453839429

45640304034070

45640304066838

Epoxy Floor Paint Anti Slip - 2.5L

What you get:

2L Coloured Curing Agent in a 2. 5L tin
0. 5L Clear Resin in a 1L tin
x1 tin of Anti Slip Aggregate (Use half with 2. 5L or all for the 5L)
(These are mixed together to make 2. 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 2. 5L is equivalent to 3. 3kg

18783453970501

18783454003269

45640255209750

Useful Information

Our Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.

If you’re painting an area of up to 15m², you’ll need two 2.5L tins (because, once mixed, a 5L tin won't keep for the second coat). Whereas, for an area of roughly 30m², you’ll need two 5L tins.

  • Here’s how we work it out:
  • Area to be painted: 45m² with two coats (we recommend two coats for the best result)
  • Tins needed: 2 x 5L and 2 x 2.5L
  • Why: Use 1 x 5L and 1 x 2.5L for the first coat; and the same again for the second

Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without any waste, at the lowest price – guaranteed.

Got It
How it Works
Calculate

  • Tins

  • Tins

FREE Standard Delivery*
Free standard delivery on your order when you spend over £100

FREE Standard Delivery*

Order from floorsaver and get free standard delivery on your order when you spend over £100. (For smaller orders, a carriage charge does apply.)

Choose standard delivery and we'll get your order to you within 2-3 working days*. Our warehouse is closed at the weekend, so orders placed on a Saturday or Sunday will be processed on the following Monday.

*Delivery exclusions

We only deliver to the UK mainland, excluding the Scottish Highlands. That means we're unable to deliver to Northern Ireland, Ireland, Isles of Scilly, Isle of Wight or the Channel Islands. We are also unable to provide next day delivery to Scotland.

More info

  • What you get:

    2L Coloured Curing Agent in a 2. 5L tin
    0. 5L Clear Resin in a 1L tin
    x1 tin of Anti Slip Aggregate (Use half with 2. 5L or all for the 5L)
    (These are mixed together to make 2. 5L of paint)

    Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish.

    Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

    The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

    It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

    For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

    NB: 2. 5L is equivalent to 3. 3kg

  • Preparation

    • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
    • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly "Sand" glossy paint to dull down the shine and roughen it up.
    • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

    Repairs

    • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.</li></ul>

    Application

    • Apply at a minimum temperature of 15°C
    • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
    • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
    • Give a good stir with something wide, like a "Wood"en batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
    • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
    • Use a brush around the edges and a medium pile roller for the floor.
    • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.
    • EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.
    • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint.
    • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic.
  • Specification Value
    Product usage
    • Interior
    Product shelf life 12 months, if unopened and should not be allowed to freeze.
    Maximum operational temperature 60°C
    Product drying time At 15-20°C: Recoat - 12 hours. The second coat should be applied within 5 days of the first coat. Walk on - 16-24 hours. Cars - 2-3 days. Full hardness, scratch & chemical resistance - 7 days.
    Product coats 2
    Product coverage 5L / 6.6kg covers up to 30m2 per coat2.5L / 3.3kg covers up to 15m2 per coat
    Product properties Virtually odourless - can be applied in confined areasGood general chemical resistance
    Product applications Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 5L tin can be used for 2 coats. It will cover 30m2 with one coat, but if you have for example, 15m2, you can use half the 5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat - it will have gone off in the tin. This is why we also make a 2.5L size. This covers 15m2 with one coat, so select two of these if you want to apply 2 coats to an area of up to 15m2.You can combine 5L (30m2) and 2.5L (15m2) for areas which are not multiples of 30m2 in size and more than one coat is required. For example, to cover 45m2 with 2 coats use 1 x 5L and 1 x 2.5L for the first coat and same again for the second. If you have any questions please let us know.Usable working time ( at 15°C)2 hours
    We do not recommend
    • Using this product in areas where cars are parked - instead use floorsaver Epoxy Floor Paint.
    • Using outside.
    • Applying to self-levelling floor "Screed"s.
    • Applying to concrete contaminated with oil, grease, fats or wax.
    • Applying to hard, smooth, very dense or power floated concrete where the paint can't soak into the surface. If in doubt tip a cup of water onto the floor and see if it disappears.

  • Product Information Sheet

    Download

    Safety Data Sheet - Resin

    Download

    Safety Data Sheet - Curing Agent

    Download

    Safety Data Sheet - Non Slip Additive

    Download
Description

What you get:

2L Coloured Curing Agent in a 2. 5L tin
0. 5L Clear Resin in a 1L tin
x1 tin of Anti Slip Aggregate (Use half with 2. 5L or all for the 5L)
(These are mixed together to make 2. 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 2. 5L is equivalent to 3. 3kg

How to Use

Preparation

  • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
  • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly "Sand" glossy paint to dull down the shine and roughen it up.
  • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

Repairs

  • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.</li></ul>

Application

  • Apply at a minimum temperature of 15°C
  • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
  • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
  • Give a good stir with something wide, like a "Wood"en batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
  • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
  • Use a brush around the edges and a medium pile roller for the floor.
  • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.
  • EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.
  • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint.
  • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic.
Technical Spec
Specification Value
Product usage
  • Interior
Product shelf life 12 months, if unopened and should not be allowed to freeze.
Maximum operational temperature 60°C
Product drying time At 15-20°C: Recoat - 12 hours. The second coat should be applied within 5 days of the first coat. Walk on - 16-24 hours. Cars - 2-3 days. Full hardness, scratch & chemical resistance - 7 days.
Product coats 2
Product coverage 5L / 6.6kg covers up to 30m2 per coat2.5L / 3.3kg covers up to 15m2 per coat
Product properties Virtually odourless - can be applied in confined areasGood general chemical resistance
Product applications Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 5L tin can be used for 2 coats. It will cover 30m2 with one coat, but if you have for example, 15m2, you can use half the 5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat - it will have gone off in the tin. This is why we also make a 2.5L size. This covers 15m2 with one coat, so select two of these if you want to apply 2 coats to an area of up to 15m2.You can combine 5L (30m2) and 2.5L (15m2) for areas which are not multiples of 30m2 in size and more than one coat is required. For example, to cover 45m2 with 2 coats use 1 x 5L and 1 x 2.5L for the first coat and same again for the second. If you have any questions please let us know.Usable working time ( at 15°C)2 hours
We do not recommend
  • Using this product in areas where cars are parked - instead use floorsaver Epoxy Floor Paint.
  • Using outside.
  • Applying to self-levelling floor "Screed"s.
  • Applying to concrete contaminated with oil, grease, fats or wax.
  • Applying to hard, smooth, very dense or power floated concrete where the paint can't soak into the surface. If in doubt tip a cup of water onto the floor and see if it disappears.
Data Sheets

Product Information Sheet

Download

Safety Data Sheet - Resin

Download

Safety Data Sheet - Curing Agent

Download

Safety Data Sheet - Non Slip Additive

Download

QUESTIONS & ANSWERS

Ask a Question

  • A: Yes, we would recmmend keeping the heating on a low constant temperature when applying the paint and for the first 5 days to allow it to set consistently across the floor.

  • A: Hi, I am sorry but the product is not suitable for external applications. It is not UV resistant im afraid.

  • A: Hi,  Thankyou for your enquiry,  Unfortunately we do not have anything suitble for wet room environments. All our products are for porous surfaces such as concrete and asphalt.

    if I can help further please let me know.

    Regards

    Mark

  • A: Hi,

    To cover a 25m2 area with our Epoxy Floor Paint Anti-Slip, we would recommend buying 2 x 5L. 

    this would be enough to cover the area with two coats, one 5L for each coat, as recommended.

    Using the 2.5L version, you would need 4 units, so the 5L version would be more cost effective in this instance. 

    Kind Regards,

    Michael

  • A: The Epoxy Floor paint does require a minimum floor temperature of 10 degrees due to being a water based coating. Please note the air temperature is normally 5 degrees warmer than the floor.

  • A: Epoxy Floor Paint is a water based epoxy resin, and the water content will raise the grain on Plywood making the wood quite rough.  However, you can sand this back down to leave a smooth finish.  If you don't want to do this then use our Floor Paint insteaed (comes in an anti slip version too).  This is a single pack, polyurethane and it will not raise the grain.  It is a tough coating but not as much as the Epoxy Floor Paint.

  • A: Yes it can be used on walls providing you apply 2 thin coats.  If it's applied too thickly it could 'curtain' (ripple).