Packshot of Epoxy Floor Paint Anti Slip
Packshot of Epoxy Floor Paint Anti Slip

Epoxy Floor Paint Anti Slip - 5L

SKU: FS-00026

Packshot of Epoxy Floor Paint Anti Slip
Packshot of Epoxy Floor Paint Anti Slip
£76.65 INC VAT
£63.88 EXC VAT
£76.65 INC VAT
£63.88 EXC VAT

In stock

Ideal for preventing slips and trips in industrial environments, floorsaver anti slip epoxy floor paint will give your floor a tough, low maintenance and long lasting finish that will last for years before needing another coating. It's great for highly trafficked interior concrete floors and areas where vehicles are used and parked.

Product Features:

  • Use in warehouses, workshops, showrooms and factories with heavy wear and tear
  • Top choice for garage floors as it won't mark from hot tyres
  • Use on bare concrete or existing well bonded paint
  • Water based formulation, virtually solvent free and easy to clean
Select Colour
Select Size
Bulk Savings With Pallets

Need a large quantity? Buy in pallets to activate bulk savings.

How much do I need? How much do I need?
Epoxy Floor Paint - 5L Epoxy Floor Paint - 2.5L Epoxy Floor Paint Anti Slip - 5L

4L Coloured Curing Agent in a 5L tin
1L Clear Resin
x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
(These are mixed together to make 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 5L is equivalent to 6.6kg

You might also like:

18783453806661

45640304034070

51982039515519

18783453839429

51982005305727

51982005338495

51982005371263

51982005404031

51982005436799

51982005469567

51982005502335

51982005535103

51982005567871

51982005600639

51982005633407

51982005666175

51982005698943

51982005731711

Epoxy Floor Paint Anti Slip - 2.5L

What you get:

2L Coloured Curing Agent in a 2. 5L tin
0. 5L Clear Resin in a 1L tin
x1 tin of Anti Slip Aggregate (Use half with 2. 5L or all for the 5L)
(These are mixed together to make 2. 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 2. 5L is equivalent to 3. 3kg

18783453970501

18783454003269

51982440563071

51982440595839

51982440628607

51982440661375

51982440694143

51982440726911

51982440759679

51982440792447

51982440825215

51982440857983

51982440890751

51982440923519

51982440956287

51982440989055

Useful Information

Our Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.

If you’re painting an area of up to 15m², you’ll need two 2.5L tins (because, once mixed, a 5L tin won't keep for the second coat). Whereas, for an area of roughly 30m², you’ll need two 5L tins.

  • Here’s how we work it out:
  • Area to be painted: 45m² with two coats (we recommend two coats for the best result)
  • Tins needed: 2 x 5L and 2 x 2.5L
  • Why: Use 1 x 5L and 1 x 2.5L for the first coat; and the same again for the second

Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without any waste, at the lowest price – guaranteed.

Got It
How it Works
Calculate

  • Tins

  • Tins

FREE Standard Delivery*
Free standard delivery on your order when you spend over £100

FREE Standard Delivery*

Order from floorsaver and get free standard delivery on your order when you spend over £100. (For smaller orders, a carriage charge does apply.)

Choose standard delivery and we'll get your order to you within 2-3 working days*. Our warehouse is closed at the weekend, so orders placed on a Saturday or Sunday will be processed on the following Monday.

*Delivery exclusions

We only deliver to the UK mainland, excluding the Scottish Highlands. That means we're unable to deliver to Northern Ireland, Ireland, Isles of Scilly, Isle of Wight or the Channel Islands. We are also unable to provide next day delivery to Scotland.

More info

  • 4L Coloured Curing Agent in a 5L tin
    1L Clear Resin
    x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
    (These are mixed together to make 5L of paint)

    Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish.

    Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

    The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

    It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

    For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

    NB: 5L is equivalent to 6.6kg

    You might also like:

  • Preparation

    • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
    • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly "Sand" glossy paint to dull down the shine and roughen it up.
    • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

    Repairs

    • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

    Application

    • Apply at a minimum temperature of 15°C
    • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
    • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
    • Give a good stir with something wide, like a "Wood"en batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
    • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
    • Use a brush around the edges and a medium pile roller for the floor.
    • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.
    • EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.
    • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint.
    • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic.
  • Specification Value
    Product usage
    • Interior
    Product shelf life 12 months, if unopened and should not be allowed to freeze.
    Minimum application temperature 15°C
    Maximum operational temperature 60°C
    Product drying time At 15-20°C: Recoat - 12 hours. The second coat should be applied within 5 days of the first coat. Walk on - 16-24 hours. Cars - 2-3 days. Full hardness, scratch & chemical resistance - 7 days.
    Product coats 2
    Product coverage 5L / 6.6kg covers up to 30m2 per coat2.5L / 3.3kg covers up to 15m2 per coat
    Product properties Virtually odourless - can be applied in confined areasGood general chemical resistance
    We do not recommend
    • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
    • Applying to self-levelling floor "Screed"s, without checking compatibility with the "Screed" manufacturer.
    • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
    • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
    • Applying to "Metal" since it can cause rusting.

  • Product Information Sheet

    Download

    Safety Data Sheet - Resin

    Download

    Floorsaver RAL Colour Chart

    Download
Description

4L Coloured Curing Agent in a 5L tin
1L Clear Resin
x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
(These are mixed together to make 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 5L is equivalent to 6.6kg

You might also like:

How to Use

Preparation

  • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
  • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly "Sand" glossy paint to dull down the shine and roughen it up.
  • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

Repairs

  • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

Application

  • Apply at a minimum temperature of 15°C
  • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
  • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
  • Give a good stir with something wide, like a "Wood"en batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
  • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
  • Use a brush around the edges and a medium pile roller for the floor.
  • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.
  • EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.
  • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint.
  • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic.
Technical Spec
Specification Value
Product usage
  • Interior
Product shelf life 12 months, if unopened and should not be allowed to freeze.
Minimum application temperature 15°C
Maximum operational temperature 60°C
Product drying time At 15-20°C: Recoat - 12 hours. The second coat should be applied within 5 days of the first coat. Walk on - 16-24 hours. Cars - 2-3 days. Full hardness, scratch & chemical resistance - 7 days.
Product coats 2
Product coverage 5L / 6.6kg covers up to 30m2 per coat2.5L / 3.3kg covers up to 15m2 per coat
Product properties Virtually odourless - can be applied in confined areasGood general chemical resistance
We do not recommend
  • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
  • Applying to self-levelling floor "Screed"s, without checking compatibility with the "Screed" manufacturer.
  • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
  • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
  • Applying to "Metal" since it can cause rusting.
Data Sheets

Product Information Sheet

Download

Safety Data Sheet - Resin

Download

Floorsaver RAL Colour Chart

Download

QUESTIONS & ANSWERS

Ask a Question

  • A: Hi, I am sorry but we would not recommend using the is product on a tiles or vinyl floor. The coating would require a more porous surface so it can soak in and bond correctly, such as concrete or similar surfaces.

  • A: Hi, i am afraid we would note recommend this coating for this type of area. Although anti slip it does have a texture similar ot a coarse sandpaper and would not be suitable for bare foot areas.

  • A: Our Epoxy floor paint is generally used for concrete surfaces. For painting on to asphalt surfaces we would recommend our Exterior Floor paint – another textured anti slip finish - generally used for car parks, playgrounds, driveways etc.

  • A: We have a product called car park Paint – this a suitable exterior anti slip paint. We would recommend thoroughly abrading any existing coated surface first and then cleaning prior to application.

    If it is a PVA product it would depend on how thick it has been applied to advise on removal procedure, if it has been applied quite thinly then a manual wire brush effect my suffice, if a thick application of PVA has been put down the a more robust manual abrasion with a floor sander may be more beneficial- without knowing or seeing the floor it is hard to determine the best procedure.

    Once thoroughly abraded to re-create a keyed texture surface, ensure the floor is thoroughly cleaned prior to application with a medium pile roller.

  • A: You will need to apply a dampproof membrane before apply any of our coatings.

    However I am afraid this is not a product we have.

    I am sorry I couldn’t be anymore help.

  • A: Hi, our epoxy floor paint is water activated and does rely on some evaporation when drying. Therefore i dont belive mixing the sparkle or pigment in would give the desired effect. It would be better to cast it over the floor whilst still wet. But this has not been tested, so i am afraid i could offer no gaurantees on how this would work.

  • A: We don’t have the Epoxy Floor Paint Anti Slip in White. The nearest would be a Light Grey.

    We have the Warehouse Linemarking Paint in White - https://www.floorsaver.co.uk/collections/paint/products/warehouse-linemarking-paint-2-5l

    This is a 2.5L single component product & smooth finish.

  • A: Unfortunately this is not suitable for a wet room environment.

    Our epoxy paints are primarily for use in garage and workshop floors.

  • A: Sorry, we do not recommend steam cleaning a coating.  Steam cleaning is too intensive and can affect the coating either by discolouring it or softening it.